3 Fluids Tips from Someone With Experience

Guide to Choosing the Right Truck Coolant

Using the right engine is crucial for the long life of your vehicle. However, the coolant you use for small vehicles may not necessarily be the best for trucks. The coolant requirements for trucks is different from that of small cars due to the heavier load they carry. To find the right truck coolant to buy, it is important to research well. You can ensure your engine won’t overheat or get damaged by using the right coolant.

Which Coolant Should You Use?
There are many types of antifreeze or coolant that may work for your truck. Majority of the coolants are either made of ethylene glycol or propylene glycol. Keep in mind that ethylene glycol is very toxic and should be handled with extreme care. The compound should not be allowed to drain into the water table.

The national authorities have rated propylene glycol safer than ethylene glycol and this explains why it is more popular among truckers. The compound is used in all types of coolants including aircraft de-icing, toiletries and foods. However, just like is the case with ethylene glycol, the propylene glycol should not be allowed to drain into the water table.

The general rule of thumb is that the engine coolant and water should be mixed in a 50/50 ratio. On the absolute minimum, the water should form 40 percent of the mixture. Most people think that the main function of the coolant is to ensure that the engine does not freeze. While this is one of the functions, it is not the main one. The engine mixture ensure the freezing point stays low while the boiling point stays high. This is the main reason for using a coolant. If you do not use the right coolant, corrosion and rust as well as cylinder wall cavitation can result. Your engine may die due to these occurrences.

Check the Freezing Point
If you live in an area with cold climate, you should keep propylene glycol in a higher concentration. The reason for this is due to the inefficiency of the compound in lowering the freezing point.This is because the compound is not efficient in lowering the freezing point. If you live in a warm climate area, you will realize that propylene glycol transfers heat fast. If you will be hauling large loads over uneven terrains, this is the coolant you should use.

Mixing Engine Coolant
You should never dilute concentrated engine coolant with water from a faucet. Scaling of the engine usually results when you use tap water to dilute the coolant. The engine coolant should be diluted with distilled or de-ionized water. It is advisable to purchase pre-diluted coolant rather than a concentrated one.

To find the right coolant for your truck, it is important to research well. You can find the right coolant by following the tips above.
Interesting Research on Coolants – What You Didn’t Know
The Ultimate Guide to Coolants

Filed under: Foods & Culinary. Bookmark the permalink.

Speak Your Mind

Your email address will not be published.